сплав инконель 901
Инконель 901 Описание сплава
ПРИМЕНЕНИЯ сплава инконель 901
Общее торговое наименование сплава Инконель 901:
inconel 901 alloy Specifications:
bar |
AMS 5661/AMS 5660 |
Dia. 1-500mm |
forging/ring |
AMS 5661 |
As Request |
wire |
AMS 5830 |
Dia. 0.1-30mm |
inconel 901 alloy Chemical Composition
The chemical composition of Inconel 901 ™ is outlined in the following table.
Element |
Content (%) |
Nickel, Ni |
41-43 .5 |
Chromium, Cr |
11-14 |
Titanium, Ti |
2.2-2.75 |
Silicon, Si |
1 max |
Manganese, Mn |
0.8 max |
Copper, Cu |
0.5 max |
Aluminum, Al |
0.35 max |
Carbon, C |
0.1 max |
Phosphorus, P |
0.04 max |
Sulfur, S |
0.04 max |
Boron, B |
0.01 - 0.02 |
Iron, Fe |
Remainder |
Инконель 901 Коррозионная стойкость сплава
ЗАПОЛНЕНИЕ СЛАВА 901 Инконель
Инконель 901 Термообработка сплава
Inconel 901 Alloy Tensile Properties
Solution Treated: 2000°F (1093°C), 2 hours, water quenched. Stabilized: 1425°F (774°C), 4 hours , air cooled. Aged: 1350°F (732°C), 24 hours, air cooled.
Test |
0.2% Offset |
Ultimate |
% Elongation |
% Reduction |
|||
°F |
°C |
ksi |
MPa |
ksi |
MPa |
||
70 |
21.1 |
125.0 |
862 |
175 |
1207 |
15.0 |
19.0 |
Inconel 901 Alloy Stress Rupture Strength
Solution Treated: 2000°F (1093°C), 2 hours, water quenched. Stabilized: 1425°F (774°C), 4 hours , air cooled. Aged: 1350°F (732°C), 24 hours, air cooled.
Test |
Stress to Produce Rupture in |
||||||
°F |
°C |
10 Hours |
100 Hours |
1000 Hours |
|||
ksi |
MPa |
ksi |
MPa |
ksi |
MPa |
||
1000 |
538 |
-- |
-- |
120 |
827 |
100 |
689 |
Механические свойства сплава инконель 901
Инконель 901 Горячая обработка сплава
Свариваемость сплава инконель 901
Regular shape for all kinds of alloys |
|||
Form |
Specification |
Supply Form |
Others |
Sheet |
Thickness:0.40-4.75mm,General Width:1000、1219、1500mm |
Whole Coil or piece of it |
Cold Annealed,Surface 2B、2E |
Plate |
Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it |
Single hot rolling,Solid solution annealed state,Surface 1D |
Belt |
Thickness:0.10-3.0mm,Width:50-500mm |
Whole Coil or Specified size |
Cold Annealed,Surface 2B、2E |
Bar & Rod |
Rolled barΦ5-45mm,Length≤1500mm |
Polished Bar(circle、Square) |
Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm |
|||
Weld tube |
Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm |
Base on your requirement |
|
Seamless Tube |
Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm |
Base on your requirement |
|
Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Forged piece |
discs,rings,squares,blocks,slabs |
Base on your requirement |
Steel, Alloy |
Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
Welding Material |
Coil wire Φ0.025mm-1.6mm |
Base on your requirement |
Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm |
|||
Welding rodΦ1.2mm-4.0mm |
|||
Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate |
Raw Sheet Thickness≥2mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
Рекомендуем также: |