Наша компания имеет более чем 15-летний опыт в области исследований, производства, управления и продаж стали.


Difference between Annealing and Tempering

The difference between annealing and tempering is determined by how it is treated. Tempering the metal entails heating it to a certain heat below a certain threshold and then cooling it at a very slow and regulated rate, while annealing involves heating the metal to a given temperature and then cooling it at a very slow and controlled rate, and is often performed in air, vacuum, or inert atmospheres.

 

What is Heat Treatment on metals?

Heat treatments are used to modify the Mechanical-Property, Physical-Property of the metal metals without altering their appearance. They are critical processes in metal production that improve the favorable properties of metal while allowing for more processing.

The heat and temperature of metal are closely regulated in various heat treatment processes. For instance, steel is a metal that mostly goes under heat treatment for various commercial uses.

Common objectives of heat treatment are to:

 

Increase strength

Improve elasticity

Improve machining

Increase hardness

Improve formability

Increase ductility

Improve toughness

The cooling stage has varying results depending on the metal and phase. Steel hardens as it is easily cooled, while aluminum softens during the fast cooling stage of solution annealing. There are various methods through which metals are given heat treatment, but Annealing and Tempering are commonly used methods.

 

What Is Annealing?

Annealing is the process in which the steel is heated at a certain degree and then cooled slowly at a regulated pace.

Annealing is sometimes used to:

 

Prepare metal for cold working by softening it.

Increase electrical conductivity.

Increase machinability

For restoring the metal ductility annealing is done. Cold welding hardens the metal in such a way that, excessive work on it, which may break or crack the metal. Since annealing releases mechanical stresses created during machining or grinding, cold working may take place without the risk of cracking. Annealing is mostly used for steel, but some metals such as copper, aluminum, and brass may be solution annealed.

 

For the annealing process of steel, huge ovens or heaters are used. There must be enough space in the ovens so that it allows proper air to flow through the metal. Gas fire conveyor-furnace are utilized for huge metals parts, and Cars bottoms furnace is used for the small parts of metals. The metal is heated to a certain temperature during the annealing process, where recrystallization can occur. Any imperfection found due to distortion is fixed at this level. The metal is been allowed to set to a certain degree and been cooled at room temperatures.

 

To achieve a refined microstructure and thus maximize softness, the cooling process must be carried out very slowly. This is often accomplished by immersing the hot steel in sand, ashes, or other low heat conductivity materials, or by turning off the oven and allowing the steel to cool with the furnace.

 

What is tempering?

Tempering is a technique applicable to improve the hardness of alloys having alloys, especially steel. While steel which is not tempered is extremely stiff, it is too fragile for most applications. Tempering is widely used to reduce excess stiffness after hardening.

Tempering is used to modify:

 

Fortitude

The degree of difficulty

Stability of the structure

Ductility is a term that refers to the ability to tenacity. Tempering is the process of heating a metal to a specific temperature less than the critical points, which is mostly found in air, vacuum, or inert atmospheres. The temperature is changed based on how much hardness has to be minimized. Although it varies depending on the metal, in general, low temperatures decrease brittleness while retaining the majority of the hardness, while higher temperatures reduce hardness, increasing elasticity and plasticity while causing some yield and tensile strength to be lost.

 

It is necessary to keep on heating steadily which does not crack steel or other metals. The metal is held to a certain degree for a fixed time. The interior pressure within the metals is been relaxed at the time. Then the metal soon cools in the air or in room temperature.

fushunspecialsteel

Соответствуем требованиям и стандартам качества, Бережно доставляем товары в любую точку России

Отдел продаж: +86-731-89903933
Ваш менеджер: inforu@fushunspecialsteel.com
Время работы: Пн-Вс. 9:00-18:00

Copyright © 2020-2021  fushunspecialsteel.ru All right reserved

X
FUSHUNSPECIALSTEEL, Inc.
---

P: +86-731-89903933
( Пн-Сб: с 10 до 19 )
FUSHUNSPECIALSTEEL
inforu@fushunspecialsteel.com
X